Make this hoseB230103000822
Finished length400 mm
Hose specification6I
Quantity1
Left fittingM14×1.5 H型 0°（手写接头规格）FITTING · 0°View real fitting photos ↗
Right fittingM14×1.5 H型 0°（手写接头规格）FITTING · 0°View real fitting photos ↗
Route液压泵里内调节器—液压泵外内调节器
Individual hose record
B230103000822 Hose Repair Specifications
Excavator · SANY · 230C · 先导系统
Finished length400 mm
Hose repair card
Everything needed to identify and make this hose
SANY 230CPart B230103000822
Tap the card to enlarge it without leaving this page.
Repair specifications
- Part number
- B230103000822
- Installation route
- 液压泵里内调节器—液压泵外内调节器
- Hose specification
- 6I
- Finished length
- 400 mm
- Left fitting
- M14×1.5 H型 0°（手写接头规格）
- Right fitting
- M14×1.5 H型 0°（手写接头规格）
- Quantity
- 1
Workshop guide
Finding the correct hydraulic hose for SANY 230C 先导系统
Start with the machine and route
For SANY 230C 先导系统, identify the exact model and hydraulic system on the machine first. A part number or diagram pipe number is the fastest way to narrow a replacement hose; if neither is visible, compare the installation route and the existing hose.
Read the dimensions before cutting
Check whether a listed dimension is finished assembly length, hose-only length, or cut length. These are not interchangeable. Confirm hose specification and pressure rating, then compare both ends separately: thread, sealing seat, size, angle, and orientation.
Records to compare
- B230103000822400 mm · 6I · 液压泵里内调节器—液压泵外内调节器
Use the drawing as a location check
Where an installation drawing or manual figure is available, match its callout to the part number and physical route. A hydraulic circuit diagram explains connections but does not show the exact routing of a hose on the machine. Take the old hose or clear end-fitting photographs to the workshop if any dimension is missing.
For reference only. Confirm the actual hose before fabrication.