Hydraulic line repair data

Sumitomo SH460HD-5 Hydraulic System Hose List

Coverage details
Hoses
3 records
Full specifications
3 records
Systems
1 systems
Length range
1,020–2,400 mm

Current system

Find a hose in this system

Use the number on the diagram, a part number, connection point, length, hose size, or fitting.

Search another machine

Hose repair details

Hose Length and Fitting List

Workshop guide

Finding the correct hydraulic hose for Sumitomo SH460HD-5 Hydraulic System

Start with the machine and route

For Sumitomo SH460HD-5 Hydraulic System, identify the exact model and hydraulic system on the machine first. A part number or diagram pipe number is the fastest way to narrow a replacement hose; if neither is visible, compare the installation route and the existing hose.

See all Sumitomo SH460HD-5 systems

Read the dimensions before cutting

Check whether a listed dimension is finished assembly length, hose-only length, or cut length. These are not interchangeable. Confirm hose specification and pressure rating, then compare both ends separately: thread, sealing seat, size, angle, and orientation.

Records to compare

  • KHJ30932,400 mm · 6I · 分配阀上边—手柄中转阀块
  • KNJ23601,020 mm · 13II · 合流阀块—油箱
  • KTJ120801,050 mm · 19II · 中心油道—回转马达（回油）

Use the drawing as a location check

Where an installation drawing or manual figure is available, match its callout to the part number and physical route. A hydraulic circuit diagram explains connections but does not show the exact routing of a hose on the machine. Take the old hose or clear end-fitting photographs to the workshop if any dimension is missing.

Based on current published data

Common Repair Questions

Questions appear only when a published record or linked PDF page provides the answer.

How many hoses are currently listed for Sumitomo SH460HD-5 Hydraulic System?

There are 3 published records. 3 include a length, both end fittings, and a part number or diagram pipe number.

What is the hose length range for Sumitomo SH460HD-5 Hydraulic System?

Based on published records with valid lengths, the range is 1,020–2,400 mm. Open the individual record to verify its installation position and both end fittings before fabrication.

Which hose specifications are common for Sumitomo SH460HD-5 Hydraulic System?

The most frequent raw specifications in the current published records are: 13II (1 records), 19II (1 records), 6I (1 records). Verify the specification together with length, pressure, and fitting details.

How can I identify the left and right hose fittings for Sumitomo SH460HD-5 Hydraulic System?

Each record keeps the left and right fitting descriptions separate. Current examples: KHJ3093: left 1/4英寸 D型直通; right 1/4英寸 D型直通; KNJ2360: left 1/2英寸 D型直通; right 1/2英寸 D型90度; KTJ12080: left 3/4英寸 D型直通; right 3/4英寸 D型直通. Open the exact part-number or pipe-number record; do not swap ends based on appearance alone.

Scroll to Top