Make this hoseKTJ12080
Finished length1,050 mm
Hose specification19II
Quantity1
Left fitting3/4英寸 D型直通FITTING · 0°View real fitting photos ↗
Right fitting3/4英寸 D型直通FITTING · 0°View real fitting photos ↗
Route中心油道—回转马达（回油）
Individual hose record
KTJ12080 Hose Repair Specifications
Excavator · Sumitomo · SH460HD-5 · Hydraulic System
Finished length1,050 mm
Hose repair card
Everything needed to identify and make this hose
Sumitomo SH460HD-5Part KTJ12080
Tap the card to enlarge it without leaving this page.
Repair specifications
- Part number
- KTJ12080
- Installation route
- 中心油道—回转马达（回油）
- Hose specification
- 19II
- Finished length
- 1,050 mm
- Left fitting
- 3/4英寸 D型直通
- Right fitting
- 3/4英寸 D型直通
- Quantity
- 1
Same system
Related Hoses
- Length
- 1,020 mm
- Specification
- 13II
- Left fitting
- 1/2英寸 D型直通
- Right fitting
- 1/2英寸 D型90度
- Length
- 2,400 mm
- Specification
- 6I
- Left fitting
- 1/4英寸 D型直通
- Right fitting
- 1/4英寸 D型直通
Workshop guide
Finding the correct hydraulic hose for Sumitomo SH460HD-5 Hydraulic System
Start with the machine and route
For Sumitomo SH460HD-5 Hydraulic System, identify the exact model and hydraulic system on the machine first. A part number or diagram pipe number is the fastest way to narrow a replacement hose; if neither is visible, compare the installation route and the existing hose.
Read the dimensions before cutting
Check whether a listed dimension is finished assembly length, hose-only length, or cut length. These are not interchangeable. Confirm hose specification and pressure rating, then compare both ends separately: thread, sealing seat, size, angle, and orientation.
Records to compare
- KTJ120801,050 mm · 19II · 中心油道—回转马达（回油）
Use the drawing as a location check
Where an installation drawing or manual figure is available, match its callout to the part number and physical route. A hydraulic circuit diagram explains connections but does not show the exact routing of a hose on the machine. Take the old hose or clear end-fitting photographs to the workshop if any dimension is missing.
For reference only. Confirm the actual hose before fabrication.