Individual hose record

DS2093250 Hydraulic Hose Replacement Specifications

Excavator · Doosan · DX260LC · Control Valve

Finished length590 mm

Hose repair card

Everything needed to identify and make this hose

Doosan DX260LCPart DS2093250

Make this hoseDS2093250

Finished length590 mm

Hose specification10I

Quantity1

Left fittingFitting type — English review pendingFITTING · 0°View real fitting photos ↗

Right fittingFitting type — English review pendingFITTING · 0°View real fitting photos ↗

RouteInstallation route — English review pending

Tap the card to enlarge it without leaving this page.

Repair specifications

Part number: DS2093250
Installation route: Installation route — English review pendingOriginal Chinese: 分配阀前边—油箱
Hose specification: 10I
Finished length: 590 mm
Left fitting: Fitting type — English review pendingOriginal Chinese: 3/8″ D型 0°（手写接头规格）
Right fitting: Fitting type — English review pendingOriginal Chinese: 3/8″ D型 90°（手写接头规格）
Quantity: 1

Workshop guide

Finding the correct hydraulic hose for Doosan DX260LC Control Valve

Start with the machine and route

For Doosan DX260LC Control Valve, identify the exact model and hydraulic system on the machine first. A part number or diagram pipe number is the fastest way to narrow a replacement hose; if neither is visible, compare the installation route and the existing hose.

See all Doosan DX260LC systems

Read the dimensions before cutting

Check whether a listed dimension is finished assembly length, hose-only length, or cut length. These are not interchangeable. Confirm hose specification and pressure rating, then compare both ends separately: thread, sealing seat, size, angle, and orientation.

Records to compare

DS2093250590 mm · 10I · Installation route — English review pending

Use the drawing as a location check

Where an installation drawing or manual figure is available, match its callout to the part number and physical route. A hydraulic circuit diagram explains connections but does not show the exact routing of a hose on the machine. Take the old hose or clear end-fitting photographs to the workshop if any dimension is missing.

Optional cross-check

Ask an AI search tool to check this repair data

The question is already written for this machine or hose. Use a tool with web search enabled; treat its answer as a starting point and verify on the machine.

ChatGPT Perplexity Claude Google AI Mode

See the exact question being sent

I am checking hydraulic hose repair information for "DS2093250 Hydraulic Hose Replacement Specifications". Use web search and cite a source for every factual point. Compare this HoseSeek page with manufacturer manuals and reliable parts documentation: https://www.hoseseek.com/hoses/hose_e9e2a0a858e5993afc25a319/
HoseSeek currently shows: part number: DS2093250; installation route: Installation route — English review pending; hose specification: 10I; finished length in millimetres: 590; left fitting: Fitting type — English review pending; right fitting: Fitting type — English review pending.

Verify, where applicable:
1. Exact machine model and any serial-number range.
2. Hydraulic system and installation route.
3. Hose part number and diagram pipe number.
4. Finished length, hose specification, and pressure rating.
5. Both end fittings, including thread, sealing seat, size, and angle.
6. Installation-diagram position and routing.

State explicitly what you could not verify. Do not infer a missing dimension or fitting. End with a short on-machine checklist for a hose repair technician.

For reference only. Confirm the actual hose before fabrication.