- Length
- 1,651 mm
- Specification
- SAE 100R17; ID 1/4 in
- Left fitting
- FEMALE, 37° JIC, SWIVEL
- Right fitting
- FEMALE, 37° JIC, SWIVEL
Manufacturer-coded hose specifications
H310400500 Hydraulic Hose Specifications
Telehandler · Skyjack · SJ519 TH
Total length1,270 mm
Hose assembly details
- Part number
- H310400500
- Hose type
- SAE 100R17; ID 1/4 in
- Total length
- 1,270 mm
- Left fitting code
- FEMALE, 37° JIC, SWIVEL
- Right fitting code
- FEMALE, 37° JIC, SWIVEL
- Machine / serial range
- SJ519 TH: 87 500 000 - 87 599 999
- Manual page
- 225
Same machine
More hoses for this machine
- Length
- 1,752.6 mm
- Specification
- SAE 100R17; ID 1/4 in
- Left fitting
- FEMALE, 37° JIC, SWIVEL
- Right fitting
- FEMALE, 37° JIC, SWIVEL
- Length
- 711.2 mm
- Specification
- SAE 100R17; ID 1/4 in
- Left fitting
- FEMALE, 37° JIC, SWIVEL
- Right fitting
- FEMALE, 37° JIC, SWIVEL
- Length
- 2,032 mm
- Specification
- SAE 100R17; ID 1/4 in
- Left fitting
- FEMALE, 37° JIC, SWIVEL
- Right fitting
- FEMALE, 37° JIC, SWIVEL
- Length
- 2,286 mm
- Specification
- SAE 100R17; ID 1/4 in
- Left fitting
- FEMALE, 37° JIC, SWIVEL
- Right fitting
- FEMALE, 37° JIC, SWIVEL
- Length
- 2,489.2 mm
- Specification
- SAE 100R17; ID 1/4 in
- Left fitting
- FEMALE, 37° JIC, SWIVEL
- Right fitting
- FEMALE, 37° JIC, SWIVEL
- Length
- 1,193.8 mm
- Specification
- SAE 100R17; ID 1/4 in
- Left fitting
- SHORT 90°, FEMALE, 37° JIC, SWIVEL
- Right fitting
- FEMALE, 37° JIC, SWIVEL
- Length
- 2,463.8 mm
- Specification
- SAE 100R17; ID 1/4 in
- Left fitting
- SHORT 90°, FEMALE, 37° JIC, SWIVEL
- Right fitting
- FEMALE, 37° JIC, SWIVEL
Workshop guide
Finding the correct hydraulic hose for Skyjack SJ519 TH
Start with the machine and route
For Skyjack SJ519 TH, identify the exact model and hydraulic system on the machine first. A part number or diagram pipe number is the fastest way to narrow a replacement hose; if neither is visible, compare the installation route and the existing hose.
Read the dimensions before cutting
Check whether a listed dimension is finished assembly length, hose-only length, or cut length. These are not interchangeable. Confirm hose specification and pressure rating, then compare both ends separately: thread, sealing seat, size, angle, and orientation.
Records to compare
- H3104005001,270 mm · SAE 100R17; ID 1/4 in · SJ519 TH: 87 500 000 - 87 599 999
Use the drawing as a location check
Where an installation drawing or manual figure is available, match its callout to the part number and physical route. A hydraulic circuit diagram explains connections but does not show the exact routing of a hose on the machine. Take the old hose or clear end-fitting photographs to the workshop if any dimension is missing.
Optional cross-check
Ask an AI search tool to check this repair data
The question is already written for this machine or hose. Use a tool with web search enabled; treat its answer as a starting point and verify on the machine.
See the exact question being sent
I am checking hydraulic hose repair information for "H310400500 Hydraulic Hose Specifications". Use web search and cite a source for every factual point. Compare this HoseSeek page with manufacturer manuals and reliable parts documentation: https://www.hoseseek.com/hoses/hosec_cfe883940c47a4000be9ca3f/ HoseSeek currently shows: part number: H310400500; hose specification: SAE 100R17; ID 1/4 in; finished length in millimetres: 1270; left fitting: FEMALE, 37° JIC, SWIVEL; right fitting: FEMALE, 37° JIC, SWIVEL. Verify, where applicable: 1. Exact machine model and any serial-number range. 2. Hydraulic system and installation route. 3. Hose part number and diagram pipe number. 4. Finished length, hose specification, and pressure rating. 5. Both end fittings, including thread, sealing seat, size, and angle. 6. Installation-diagram position and routing. State explicitly what you could not verify. Do not infer a missing dimension or fitting. End with a short on-machine checklist for a hose repair technician.
For reference only. Confirm the actual hose before fabrication.