Individual hose record

ZX23M04290 Hydraulic Hose Replacement Specifications

Excavator · Kobelco · SK250LC-6E · 行走马达

Finished length2,900 mm

Hose repair card

Everything needed to identify and make this hose

Kobelco SK250LC-6EPart ZX23M04290

Make this hoseZX23M04290
L = 2,900 mm6IL0°R0°
Finished length2,900 mm
Hose specification6I
Quantity2
L0°

Left fitting1/4 0°FITTING · 0°View real fitting photos ↗

R0°

Right fitting1/4 0°FITTING · 0°View real fitting photos ↗

RouteInstallation route — English review pending

Tap the card to enlarge it without leaving this page.

ZX23M04290 hose repair card

Repair specifications

Part number
ZX23M04290
Installation route
Installation route — English review pendingOriginal Chinese: 行走马达—中心油封
Hose specification
6I
Finished length
2,900 mm
Left fitting
1/4 0°
Right fitting
1/4 0°
Quantity
2

Workshop guide

Finding the correct hydraulic hose for Kobelco SK250LC-6E 行走马达

Start with the machine and route

For Kobelco SK250LC-6E 行走马达, identify the exact model and hydraulic system on the machine first. A part number or diagram pipe number is the fastest way to narrow a replacement hose; if neither is visible, compare the installation route and the existing hose.

See all Kobelco SK250LC-6E systems

Read the dimensions before cutting

Check whether a listed dimension is finished assembly length, hose-only length, or cut length. These are not interchangeable. Confirm hose specification and pressure rating, then compare both ends separately: thread, sealing seat, size, angle, and orientation.

Records to compare

  • ZX23M042902,900 mm · 6I · Installation route — English review pending

Use the drawing as a location check

Where an installation drawing or manual figure is available, match its callout to the part number and physical route. A hydraulic circuit diagram explains connections but does not show the exact routing of a hose on the machine. Take the old hose or clear end-fitting photographs to the workshop if any dimension is missing.

Optional cross-check

Ask an AI search tool to check this repair data

The question is already written for this machine or hose. Use a tool with web search enabled; treat its answer as a starting point and verify on the machine.

ChatGPT Perplexity Claude Google AI Mode
See the exact question being sent
I am checking hydraulic hose repair information for "ZX23M04290 Hydraulic Hose Replacement Specifications". Use web search and cite a source for every factual point. Compare this HoseSeek page with manufacturer manuals and reliable parts documentation: https://www.hoseseek.com/hoses/hose_10d1082eab6d48a7efd83e32/
HoseSeek currently shows: part number: ZX23M04290; installation route: Installation route — English review pending; hose specification: 6I; finished length in millimetres: 2900; left fitting: 1/4 0°; right fitting: 1/4 0°.

Verify, where applicable:
1. Exact machine model and any serial-number range.
2. Hydraulic system and installation route.
3. Hose part number and diagram pipe number.
4. Finished length, hose specification, and pressure rating.
5. Both end fittings, including thread, sealing seat, size, and angle.
6. Installation-diagram position and routing.

State explicitly what you could not verify. Do not infer a missing dimension or fitting. End with a short on-machine checklist for a hose repair technician.

For reference only. Confirm the actual hose before fabrication.

Scroll to Top