Individual hose record

4I-1031 Hose Repair Specifications

Excavator · Caterpillar · CAT®319C · Solenoid Valve

Finished length500 mm

Hose repair card

Everything needed to identify and make this hose

Caterpillar CAT®319CPipe No. 3 · Part 4I-1031

Make this hose4I-1031
L = 500 mmDN10；-6；10.3MpaL0°R0°
Finished length500 mm
Working pressure10.3 MPa
Hose specificationDN10；-6；10.3Mpa
Quantity1
L0°

Left fittingAmerican female thread, flat-face sealFITTING · 0°View real fitting photos ↗

R0°

Right fittingAmerican female thread, flat-face sealFITTING · 0°View real fitting photos ↗

Route蓄能器电磁阀(液压泵左)

Tap the card to enlarge it without leaving this page.

4I-1031 hose repair card

Repair specifications

Part number
4I-1031
Diagram pipe number
3
Installation route
蓄能器电磁阀(液压泵左)
Hose specification
DN10；-6；10.3Mpa
Finished length
500 mm
Working pressure
10.3 MPa
Left fitting
American female thread, flat-face sealOriginal Chinese: 美制内螺纹平面密封
Right fitting
American female thread, flat-face sealOriginal Chinese: 美制内螺纹平面密封
Quantity
1

Same system

Related Hoses

Diagram Pipe No. 2

4I-1025

Installation route: 蓄能器电磁阀(液压泵左)

Length
300 mm
Specification
DN10；-6；10.3Mpa
Left fitting
90° elbow, American female thread, flat-face sealOriginal Chinese: 90°美制内螺纹平面密封
Right fitting
American female thread, flat-face sealOriginal Chinese: 美制内螺纹平面密封
View full repair specifications

Diagram Pipe No. 6

4I-1031

Installation route: 蓄能器电磁阀(液压泵左)~蓄能器电磁阀(液压泵左)

Length
500 mm
Specification
DN10；-6；10.3Mpa
Left fitting
American female thread, flat-face sealOriginal Chinese: 美制内螺纹平面密封
Right fitting
American female thread, flat-face sealOriginal Chinese: 美制内螺纹平面密封
View full repair specifications

Diagram Pipe No. 1

4I-1031

Installation route: 电磁阀(液压泵左)~蓄能器电磁阀(液压泵左)

Length
500 mm
Specification
DN10；-6；10.3Mpa
Left fitting
American female thread, flat-face sealOriginal Chinese: 美制内螺纹平面密封
Right fitting
American female thread, flat-face sealOriginal Chinese: 美制内螺纹平面密封
View full repair specifications

Diagram Pipe No. 6

4I-1031

Installation route: 蓄能器电磁阀(液压泵左)~电磁阀(液压泵左)

Length
500 mm
Specification
DN10；-6；10.3Mpa
Left fitting
American female thread, flat-face sealOriginal Chinese: 美制内螺纹平面密封
Right fitting
American female thread, flat-face sealOriginal Chinese: 美制内螺纹平面密封
View full repair specifications

Diagram Pipe No. 1

108-7354

Installation route: 蓄能器电磁阀(液压泵左)

Length
650 mm
Specification
DN13；1SN-8；10.4Mpa
Left fitting
American female thread, flat-face sealOriginal Chinese: 美制内螺纹平面密封
Right fitting
American female thread, flat-face sealOriginal Chinese: 美制内螺纹平面密封
View full repair specifications

Diagram Pipe No. 1

4I-1025

Installation route: 电磁阀(液压泵左)~

Length
300 mm
Specification
DN10；-6；10.3Mpa
Left fitting
90° elbow, American female thread, flat-face sealOriginal Chinese: 90°美制内螺纹平面密封
Right fitting
American female thread, flat-face sealOriginal Chinese: 美制内螺纹平面密封
View full repair specifications

Diagram Pipe No. 5

4I-1025

Installation route: 蓄能器电磁阀(液压泵左)~电磁阀(液压泵左)

Length
300 mm
Specification
DN10；-6；10.3Mpa
Left fitting
90° elbow, American female thread, flat-face sealOriginal Chinese: 90°美制内螺纹平面密封
Right fitting
American female thread, flat-face sealOriginal Chinese: 美制内螺纹平面密封
View full repair specifications

Diagram Pipe No. 5

4I-1025

Installation route: 蓄能器电磁阀(液压泵左)~液压油箱

Length
300 mm
Specification
DN10；-6；10.3Mpa
Left fitting
90° elbow, American female thread, flat-face sealOriginal Chinese: 90°美制内螺纹平面密封
Right fitting
American female thread, flat-face sealOriginal Chinese: 美制内螺纹平面密封
View full repair specifications

Workshop guide

Finding the correct hydraulic hose for Caterpillar CAT®319C Solenoid Valve

Start with the machine and route

For Caterpillar CAT®319C Solenoid Valve, identify the exact model and hydraulic system on the machine first. A part number or diagram pipe number is the fastest way to narrow a replacement hose; if neither is visible, compare the installation route and the existing hose.

See all Caterpillar CAT®319C systems

Read the dimensions before cutting

Check whether a listed dimension is finished assembly length, hose-only length, or cut length. These are not interchangeable. Confirm hose specification and pressure rating, then compare both ends separately: thread, sealing seat, size, angle, and orientation.

Records to compare

  • 4I-1031500 mm · DN10；-6；10.3Mpa · 蓄能器电磁阀(液压泵左)

Use the drawing as a location check

Where an installation drawing or manual figure is available, match its callout to the part number and physical route. A hydraulic circuit diagram explains connections but does not show the exact routing of a hose on the machine. Take the old hose or clear end-fitting photographs to the workshop if any dimension is missing.

For reference only. Confirm the actual hose before fabrication.

Scroll to Top