Individual hose record
Wheel Loader · Sunward · SWL3220(久保田) · Attachments
Hose repair card
Sunward SWL3220(久保田)Part 730501006465
Left fittingMetric female thread, 24° cone with O-ring — light seriesMETRIC · 0°View real fitting photos ↗
Right fittingMetric female thread, 24° cone with O-ring — light seriesMETRIC · 0°View real fitting photos ↗
RouteInstallation route — English review pending
Tap the card to enlarge it without leaving this page.
Same system
Hose record
Installation route: Installation route — English review pendingOriginal Chinese: 散热器~液压油滤清器
Hose record
Installation route: Installation route — English review pendingOriginal Chinese: 散热器上~过渡阀块(散热器)
Workshop guide
For Sunward SWL3220(久保田) Attachments, identify the exact model and hydraulic system on the machine first. A part number or diagram pipe number is the fastest way to narrow a replacement hose; if neither is visible, compare the installation route and the existing hose.
Check whether a listed dimension is finished assembly length, hose-only length, or cut length. These are not interchangeable. Confirm hose specification and pressure rating, then compare both ends separately: thread, sealing seat, size, angle, and orientation.
Where an installation drawing or manual figure is available, match its callout to the part number and physical route. A hydraulic circuit diagram explains connections but does not show the exact routing of a hose on the machine. Take the old hose or clear end-fitting photographs to the workshop if any dimension is missing.
For reference only. Confirm the actual hose before fabrication.
