Make this hoseX410-062041
Finished length2,050 mm
Hose specification10I
Quantity4
Left fitting11/16″ A型 0°（手写接头规格）FITTING · 0°View real fitting photos ↗
Right fitting11/16″ A型 45°（手写接头规格）FITTING · 45°View real fitting photos ↗
Route左手柄—中转阀
Individual hose record
X410-062041 Hose Repair Specifications
Excavator · Hyundai · R305LC-9 · Control Lever
Finished length2,050 mm
Hose repair card
Everything needed to identify and make this hose
Hyundai R305LC-9Part X410-062041
Tap the card to enlarge it without leaving this page.
Repair specifications
- Part number
- X410-062041
- Installation route
- 左手柄—中转阀
- Hose specification
- 10I
- Finished length
- 2,050 mm
- Left fitting
- 11/16″ A型 0°（手写接头规格）
- Right fitting
- 11/16″ A型 45°（手写接头规格）
- Quantity
- 4
Workshop guide
Finding the correct hydraulic hose for Hyundai R305LC-9 Control Lever
Start with the machine and route
For Hyundai R305LC-9 Control Lever, identify the exact model and hydraulic system on the machine first. A part number or diagram pipe number is the fastest way to narrow a replacement hose; if neither is visible, compare the installation route and the existing hose.
Read the dimensions before cutting
Check whether a listed dimension is finished assembly length, hose-only length, or cut length. These are not interchangeable. Confirm hose specification and pressure rating, then compare both ends separately: thread, sealing seat, size, angle, and orientation.
Records to compare
- X410-0620412,050 mm · 10I · 左手柄—中转阀
Use the drawing as a location check
Where an installation drawing or manual figure is available, match its callout to the part number and physical route. A hydraulic circuit diagram explains connections but does not show the exact routing of a hose on the machine. Take the old hose or clear end-fitting photographs to the workshop if any dimension is missing.
For reference only. Confirm the actual hose before fabrication.