Individual hose record
B230103005397 Hose Repair Specifications
Excavator · SANY · 205-8C · 回转系统
Repair specifications
- Part number
- B230103005397
- Installation route
- 回转马达—油箱
- Hose specification
- 16I
- Finished length
- 1,300 mm
- Left fitting
- M26×1.5 H型 0°（手写接头规格）
- Right fitting
- M26×1.5 H型 0°（手写接头规格）
- Quantity
- 1
Workshop guide
Finding the correct hydraulic hose for SANY 205-8C 回转系统
Start with the machine and route
For SANY 205-8C 回转系统, identify the exact model and hydraulic system on the machine first. A part number or diagram pipe number is the fastest way to narrow a replacement hose; if neither is visible, compare the installation route and the existing hose.
Read the dimensions before cutting
Check whether a listed dimension is finished assembly length, hose-only length, or cut length. These are not interchangeable. Confirm hose specification and pressure rating, then compare both ends separately: thread, sealing seat, size, angle, and orientation.
Records to compare
- B2301030053971,300 mm · 16I · 回转马达—油箱
Use the drawing as a location check
Where an installation drawing or manual figure is available, match its callout to the part number and physical route. A hydraulic circuit diagram explains connections but does not show the exact routing of a hose on the machine. Take the old hose or clear end-fitting photographs to the workshop if any dimension is missing.
For reference only. Confirm the actual hose before fabrication.