Individual hose record
02762-00509 Hose Repair Specifications
Excavator · Komatsu · PC350LC-8 · Swing Motor
Repair specifications
- Part number
- 02762-00509
- Installation route
- 中心接头~回转马达
- Hose specification
- 16I（手写管线代码）
- Finished length
- 900 mm
- Left fitting
- U1″ A型 0°（手写接头规格）
- Right fitting
- U1″ A型 0°（手写接头规格）
- Quantity
- 1
Workshop guide
Finding the correct hydraulic hose for Komatsu PC350LC-8 Swing Motor
Start with the machine and route
For Komatsu PC350LC-8 Swing Motor, identify the exact model and hydraulic system on the machine first. A part number or diagram pipe number is the fastest way to narrow a replacement hose; if neither is visible, compare the installation route and the existing hose.
Read the dimensions before cutting
Check whether a listed dimension is finished assembly length, hose-only length, or cut length. These are not interchangeable. Confirm hose specification and pressure rating, then compare both ends separately: thread, sealing seat, size, angle, and orientation.
Records to compare
- 02762-00509900 mm · 16I（手写管线代码） · 中心接头~回转马达
Use the drawing as a location check
Where an installation drawing or manual figure is available, match its callout to the part number and physical route. A hydraulic circuit diagram explains connections but does not show the exact routing of a hose on the machine. Take the old hose or clear end-fitting photographs to the workshop if any dimension is missing.
For reference only. Confirm the actual hose before fabrication.