Make this hose5I-4396
Finished length770 mm
Hose specification13I
Quantity1
Left fitting13/16 0°（手写接头规格）FITTING · 0°View real fitting photos ↗
Right fitting13/16 90°（手写接头规格）FITTING · 0°View real fitting photos ↗
Route先导滤芯—油箱
Individual hose record
5I-4396 Hose Repair Specifications
Excavator · Caterpillar · 320CUL · 先导与油箱回油系统
Finished length770 mm
Hose repair card
Everything needed to identify and make this hose
Caterpillar 320CULPart 5I-4396
Tap the card to enlarge it without leaving this page.
Repair specifications
- Part number
- 5I-4396
- Installation route
- 先导滤芯—油箱
- Hose specification
- 13I
- Finished length
- 770 mm
- Left fitting
- 13/16 0°（手写接头规格）
- Right fitting
- 13/16 90°（手写接头规格）
- Quantity
- 1
Workshop guide
Finding the correct hydraulic hose for Caterpillar 320CUL 先导与油箱回油系统
Start with the machine and route
For Caterpillar 320CUL 先导与油箱回油系统, identify the exact model and hydraulic system on the machine first. A part number or diagram pipe number is the fastest way to narrow a replacement hose; if neither is visible, compare the installation route and the existing hose.
Read the dimensions before cutting
Check whether a listed dimension is finished assembly length, hose-only length, or cut length. These are not interchangeable. Confirm hose specification and pressure rating, then compare both ends separately: thread, sealing seat, size, angle, and orientation.
Records to compare
- 5I-4396770 mm · 13I · 先导滤芯—油箱
Use the drawing as a location check
Where an installation drawing or manual figure is available, match its callout to the part number and physical route. A hydraulic circuit diagram explains connections but does not show the exact routing of a hose on the machine. Take the old hose or clear end-fitting photographs to the workshop if any dimension is missing.
For reference only. Confirm the actual hose before fabrication.