Individual hose record

001-4281243 Hose Repair Specifications

Excavator · Kato · HD820 II LC · Solenoid Valve

Finished length1,450 mm

Hose repair card

Everything needed to identify and make this hose

Kato HD820 II LCPart 001-4281243

Make this hose001-4281243
L = 1,450 mm10IL0°R90°
Finished length1,450 mm
Hose specification10I
Quantity1
L0°

Left fitting3/8″ D型 0°（手写接头规格）FITTING · 0°View real fitting photos ↗

R90°

Right fitting3/8″ D型 90°（手写接头规格）FITTING · 90°View real fitting photos ↗

Route手柄中转—电磁阀

Tap the card to enlarge it without leaving this page.

001-4281243 hose repair card

Repair specifications

Part number
001-4281243
Installation route
手柄中转—电磁阀
Hose specification
10I
Finished length
1,450 mm
Left fitting
3/8″ D型 0°（手写接头规格）
Right fitting
3/8″ D型 90°（手写接头规格）
Quantity
1

Workshop guide

Finding the correct hydraulic hose for Kato HD820 II LC Solenoid Valve

Start with the machine and route

For Kato HD820 II LC Solenoid Valve, identify the exact model and hydraulic system on the machine first. A part number or diagram pipe number is the fastest way to narrow a replacement hose; if neither is visible, compare the installation route and the existing hose.

See all Kato HD820 II LC systems

Read the dimensions before cutting

Check whether a listed dimension is finished assembly length, hose-only length, or cut length. These are not interchangeable. Confirm hose specification and pressure rating, then compare both ends separately: thread, sealing seat, size, angle, and orientation.

Records to compare

Use the drawing as a location check

Where an installation drawing or manual figure is available, match its callout to the part number and physical route. A hydraulic circuit diagram explains connections but does not show the exact routing of a hose on the machine. Take the old hose or clear end-fitting photographs to the workshop if any dimension is missing.

Optional cross-check

Ask an AI search tool to check this repair data

The question is already written for this machine or hose. Use a tool with web search enabled; treat its answer as a starting point and verify on the machine.

ChatGPT Perplexity Claude Google AI Mode
See the exact question being sent
I am checking hydraulic hose repair information for "001-4281243 Hose Repair Specifications". Use web search and cite a source for every factual point. Compare this HoseSeek page with manufacturer manuals and reliable parts documentation: https://www.hoseseek.com/hoses/hose_890b9cbfae096c981944872e/
HoseSeek currently shows: part number: 001-4281243; installation route: 手柄中转—电磁阀; hose specification: 10I; finished length in millimetres: 1450; left fitting: 3/8″ D型 0°（手写接头规格）; right fitting: 3/8″ D型 90°（手写接头规格）.

Verify, where applicable:
1. Exact machine model and any serial-number range.
2. Hydraulic system and installation route.
3. Hose part number and diagram pipe number.
4. Finished length, hose specification, and pressure rating.
5. Both end fittings, including thread, sealing seat, size, and angle.
6. Installation-diagram position and routing.

State explicitly what you could not verify. Do not infer a missing dimension or fitting. End with a short on-machine checklist for a hose repair technician.

For reference only. Confirm the actual hose before fabrication.

Scroll to Top