Individual hose record

B230103001100 Hose Repair Specifications

Excavator · SANY · SY135-9 · Swing Motor

Finished length1,050 mm

Hose repair card

Everything needed to identify and make this hose

SANY SY135-9Part B230103001100

Make this hoseB230103001100

Finished length1,050 mm

Hose specification16I（手写管线代码）

Quantity1

Left fittingM26×1.5 H型 0°（手写接头规格）FITTING · 0°View real fitting photos ↗

Right fittingM26×1.5 H型 90°（手写接头规格）FITTING · 0°View real fitting photos ↗

Route回转马达—油箱

Tap the card to enlarge it without leaving this page.

Repair specifications

Part number: B230103001100
Installation route: 回转马达—油箱
Hose specification: 16I（手写管线代码）
Finished length: 1,050 mm
Left fitting: M26×1.5 H型 0°（手写接头规格）
Right fitting: M26×1.5 H型 90°（手写接头规格）
Quantity: 1

Workshop guide

Finding the correct hydraulic hose for SANY SY135-9 Swing Motor

Start with the machine and route

For SANY SY135-9 Swing Motor, identify the exact model and hydraulic system on the machine first. A part number or diagram pipe number is the fastest way to narrow a replacement hose; if neither is visible, compare the installation route and the existing hose.

See all SANY SY135-9 systems

Read the dimensions before cutting

Check whether a listed dimension is finished assembly length, hose-only length, or cut length. These are not interchangeable. Confirm hose specification and pressure rating, then compare both ends separately: thread, sealing seat, size, angle, and orientation.

Records to compare

B2301030011001,050 mm · 16I（手写管线代码） · 回转马达—油箱

Use the drawing as a location check

Where an installation drawing or manual figure is available, match its callout to the part number and physical route. A hydraulic circuit diagram explains connections but does not show the exact routing of a hose on the machine. Take the old hose or clear end-fitting photographs to the workshop if any dimension is missing.

For reference only. Confirm the actual hose before fabrication.