Individual hose record

ZX22M08070 Hose Repair Specifications

Excavator · Kobelco · SK270XD-10 · Swing Motor

Finished length700 mm

Hose repair card

Everything needed to identify and make this hose

Kobelco SK270XD-10Part ZX22M08070

Make this hoseZX22M08070
L = 700 mm13IIL0°R0°
Finished length700 mm
Hose specification13II
Quantity1
L0°

Left fitting1/2″ C型 0°（手写接头规格）FITTING · 0°View real fitting photos ↗

R0°

Right fitting1/2″ C型 0°（手写接头规格）FITTING · 0°View real fitting photos ↗

Route回转马达—中心油道

Tap the card to enlarge it without leaving this page.

ZX22M08070 hose repair card

Repair specifications

Part number
ZX22M08070
Installation route
回转马达—中心油道
Hose specification
13II
Finished length
700 mm
Left fitting
1/2″ C型 0°（手写接头规格）
Right fitting
1/2″ C型 0°（手写接头规格）
Quantity
1

Workshop guide

Finding the correct hydraulic hose for Kobelco SK270XD-10 Swing Motor

Start with the machine and route

For Kobelco SK270XD-10 Swing Motor, identify the exact model and hydraulic system on the machine first. A part number or diagram pipe number is the fastest way to narrow a replacement hose; if neither is visible, compare the installation route and the existing hose.

See all Kobelco SK270XD-10 systems

Read the dimensions before cutting

Check whether a listed dimension is finished assembly length, hose-only length, or cut length. These are not interchangeable. Confirm hose specification and pressure rating, then compare both ends separately: thread, sealing seat, size, angle, and orientation.

Records to compare

  • ZX22M08070700 mm · 13II · 回转马达—中心油道

Use the drawing as a location check

Where an installation drawing or manual figure is available, match its callout to the part number and physical route. A hydraulic circuit diagram explains connections but does not show the exact routing of a hose on the machine. Take the old hose or clear end-fitting photographs to the workshop if any dimension is missing.

Optional cross-check

Ask an AI search tool to check this repair data

The question is already written for this machine or hose. Use a tool with web search enabled; treat its answer as a starting point and verify on the machine.

ChatGPT Perplexity Claude Google AI Mode
See the exact question being sent
I am checking hydraulic hose repair information for "ZX22M08070 Hose Repair Specifications". Use web search and cite a source for every factual point. Compare this HoseSeek page with manufacturer manuals and reliable parts documentation: https://www.hoseseek.com/hoses/hose_b73c54ec7e2de032999851b9/
HoseSeek currently shows: part number: ZX22M08070; installation route: 回转马达—中心油道; hose specification: 13II; finished length in millimetres: 700; left fitting: 1/2″ C型 0°（手写接头规格）; right fitting: 1/2″ C型 0°（手写接头规格）.

Verify, where applicable:
1. Exact machine model and any serial-number range.
2. Hydraulic system and installation route.
3. Hose part number and diagram pipe number.
4. Finished length, hose specification, and pressure rating.
5. Both end fittings, including thread, sealing seat, size, and angle.
6. Installation-diagram position and routing.

State explicitly what you could not verify. Do not infer a missing dimension or fitting. End with a short on-machine checklist for a hose repair technician.

For reference only. Confirm the actual hose before fabrication.

Scroll to Top