For Caterpillar CAT®319C Grease Lines, identify the exact model and hydraulic system on the machine first. A part number or diagram pipe number is the fastest way to narrow a replacement hose; if neither is visible, compare the installation route and the existing hose.

See all Caterpillar CAT®319C systems

Read the dimensions before cutting

Check whether a listed dimension is finished assembly length, hose-only length, or cut length. These are not interchangeable. Confirm hose specification and pressure rating, then compare both ends separately: thread, sealing seat, size, angle, and orientation.

Records to compare

115-26772,550 mm · DN6；-4；19.2Mpa · 小臂销黄油管左
351-46112,359 mm · DN6；1SN-4；10.4Mpa · Right boom-cylinder grease line
120-72263,100 mm · DN6；-4；10.3Mpa · Arm-cylinder grease line

Use the drawing as a location check

Where an installation drawing or manual figure is available, match its callout to the part number and physical route. A hydraulic circuit diagram explains connections but does not show the exact routing of a hose on the machine. Take the old hose or clear end-fitting photographs to the workshop if any dimension is missing.

Based on current published data

Common Repair Questions

Questions appear only when a published record or linked PDF page provides the answer.

How many hoses are currently listed for Caterpillar CAT®319C Grease Lines?

There are 5 published records. 5 include a length, both end fittings, and a part number or diagram pipe number.

What is the hose length range for Caterpillar CAT®319C Grease Lines?

Based on published records with valid lengths, the range is 2,359–3,100 mm. Open the individual record to verify its installation position and both end fittings before fabrication.

Which hose specifications are common for Caterpillar CAT®319C Grease Lines?

The most frequent raw specifications in the current published records are: DN6；-4；10.3Mpa (2 records), DN6；1SN-4；10.4Mpa (2 records), DN6；-4；19.2Mpa (1 records). Verify the specification together with length, pressure, and fitting details.

How can I identify the left and right hose fittings for Caterpillar CAT®319C Grease Lines?

Each record keeps the left and right fitting descriptions separate. Current examples: 115-2677: left 美制锥形外螺纹30°内锥; right 美制锥形外螺纹; 351-4611: left 美制锥形外螺纹30°内锥; right 美制锥形外螺纹; 120-7226: left 美制锥形外螺纹30°内锥; right 美制锥形外螺纹. Open the exact part-number or pipe-number record; do not swap ends based on appearance alone.

Can I locate a Caterpillar CAT®319C Grease Lines hose by diagram pipe number?

Yes. Current examples with a diagram pipe number are: Pipe No. 7 (115-2677), Pipe No. 13 (351-4611), Pipe No. 14 (120-7226), Pipe No. 12 (351-4610). Open a record to compare its installation position with the linked manual page.