Make this hose123-5349
Finished length2,400 mm
Working pressure10.3 MPa
Hose specificationDN6；-4；10.3Mpa
Quantity1
Left fitting美制锥形外螺纹30°内锥SAE 30° · 0°View real fitting photos ↗
Right fitting美制锥形外螺纹SAE · 0°View real fitting photos ↗
Route小臂销黄油管右
Individual hose record
123-5349 Hose Repair Specifications
Excavator · Caterpillar · CAT®319C · Grease Lines
Finished length2,400 mm
Hose repair card
Everything needed to identify and make this hose
Caterpillar CAT®319CPipe No. 8 · Part 123-5349
Tap the card to enlarge it without leaving this page.
Repair specifications
- Part number
- 123-5349
- Diagram pipe number
- 8
- Installation route
- 小臂销黄油管右
- Hose specification
- DN6；-4；10.3Mpa
- Finished length
- 2,400 mm
- Working pressure
- 10.3 MPa
- Left fitting
- 美制锥形外螺纹30°内锥
- Right fitting
- 美制锥形外螺纹
- Quantity
- 1
Same system
Related Hoses
- Length
- 3,100 mm
- Specification
- DN6；-4；10.3Mpa
- Left fitting
- 美制锥形外螺纹30°内锥
- Right fitting
- 美制锥形外螺纹
Diagram Pipe No. 12
351-4610
Installation route: Left boom-cylinder grease lineOriginal Chinese: 左大臂油缸黄油管
- Length
- 2,409 mm
- Specification
- DN6；1SN-4；10.4Mpa
- Left fitting
- 美制锥形外螺纹30°内锥
- Right fitting
- 美制锥形外螺纹
Diagram Pipe No. 13
351-4611
Installation route: Right boom-cylinder grease lineOriginal Chinese: 右大臂油缸黄油管
- Length
- 2,359 mm
- Specification
- DN6；1SN-4；10.4Mpa
- Left fitting
- 美制锥形外螺纹30°内锥
- Right fitting
- 美制锥形外螺纹
- Length
- 2,550 mm
- Specification
- DN6；-4；19.2Mpa
- Left fitting
- 美制锥形外螺纹30°内锥
- Right fitting
- 美制锥形外螺纹
Workshop guide
Finding the correct hydraulic hose for Caterpillar CAT®319C Grease Lines
Start with the machine and route
For Caterpillar CAT®319C Grease Lines, identify the exact model and hydraulic system on the machine first. A part number or diagram pipe number is the fastest way to narrow a replacement hose; if neither is visible, compare the installation route and the existing hose.
Read the dimensions before cutting
Check whether a listed dimension is finished assembly length, hose-only length, or cut length. These are not interchangeable. Confirm hose specification and pressure rating, then compare both ends separately: thread, sealing seat, size, angle, and orientation.
Records to compare
- 123-53492,400 mm · DN6；-4；10.3Mpa · 小臂销黄油管右
Use the drawing as a location check
Where an installation drawing or manual figure is available, match its callout to the part number and physical route. A hydraulic circuit diagram explains connections but does not show the exact routing of a hose on the machine. Take the old hose or clear end-fitting photographs to the workshop if any dimension is missing.
For reference only. Confirm the actual hose before fabrication.