The current published data covers 6 systems and 10 hose records. Systems with more listed records include: Attachments (3 hoses), Swivel Joint (2 hoses), Control Lever (2 hoses).

What is the hose length range for Caterpillar CAT®235?

Based on published records with valid lengths, the range is 368–1,665 mm. Open the individual record to verify its installation position and both end fittings before fabrication.

Which hose specifications are common for Caterpillar CAT®235?

The most frequent raw specifications in the current published records are: DN19;1SN-12;8.7Mpa (3 records), DN10;2SN-6;33Mpa (2 records), DN13;1SN-8;14Mpa (2 records), DN10;1SN-6;15.7Mpa (1 records), DN25;1SN-16;7Mpa (1 records). Verify the specification together with length, pressure, and fitting details.

How can I identify the left and right hose fittings for Caterpillar CAT®235?

Each record keeps the left and right fitting descriptions separate. Current examples: 033-2159: left 美制内螺纹37°锥; right 美制内螺纹37°锥; 8K-4790: left 美制内螺纹37°锥; right 美制内螺纹37°锥; 033-2159: left 美制内螺纹37°锥; right 美制内螺纹37°锥. Open the exact part-number or pipe-number record; do not swap ends based on appearance alone.

Can I locate a Caterpillar CAT®235 hose by diagram pipe number?

Yes. Current examples with a diagram pipe number are: Pipe No. 18 (033-2159), Pipe No. 30 (8K-4790), Pipe No. 5 (033-2159), Pipe No. 9 (8V-0536). Open a record to compare its installation position with the linked manual page.

Optional cross-check

Ask an AI search tool to check this repair data

The question is already written for this machine or hose. Use a tool with web search enabled; treat its answer as a starting point and verify on the machine.

ChatGPT Perplexity Claude Google AI Mode

See the exact question being sent

I am checking hydraulic hose repair information for "Caterpillar CAT®235 Hose Repair Data". Use web search and cite a source for every factual point. Compare this HoseSeek page with manufacturer manuals and reliable parts documentation: https://www.hoseseek.com/machines/caterpillar/cat-174-235--43415426233137343b323335/

Verify, where applicable:
1. Exact machine model and any serial-number range.
2. Hydraulic system and installation route.
3. Hose part number and diagram pipe number.
4. Finished length, hose specification, and pressure rating.
5. Both end fittings, including thread, sealing seat, size, and angle.
6. Installation-diagram position and routing.

State explicitly what you could not verify. Do not infer a missing dimension or fitting. End with a short on-machine checklist for a hose repair technician.

Choose a system

Find a hose on this machine

Hose Length and Fitting List

Common Repair Questions

Ask an AI search tool to check this repair data